Australian owned and operated for over 50 years
- Choice of two product sizes to heat small or large rooms
- Inbuilt models
- Power flued models
- Stylish slimline cabinet
- Electronic ignition to eliminate the need for wasteful pilot lights
- Simple to operate electronic controls
- Three pre-set temperature settings
- Rear Register option to split heating into two rooms
- Cool touch exterior cabinet
- Direct replacement for most gas wall furnace models
- Two year parts and labour warranty.**
- 10 years parts only warranty on heat exchanger and burner.**
- Power flued 9kW unit has an energy efficiency rating of 4.3 stars
Recommended Accessories
Heating FAQ’s
1. What is a heating changeover?
A heating changeover is the replacing of an old heating unit with a new one with similar physical properties.
2. Why change my model over instead of installing a new one?
Changing over a model is far less time consuming and thus significantly cheaper than installing a brand new model.
3. When is it time to get a new heater?
There are two common ways to know when the time has come to change your ducted gas heating. If you find that your utility bills are getting out of control, you may realise that your ducted gas heater is spending far more gas than it needs to – and a new, more efficient model is needed to cut your bills. The other reason is fairly simple – you’ve turned it on, and the air isn’t flowing!
4. My heater is malfunctioning but I’m worried about the coronavirus, is a changeover an “essential service” and how can I minimise contact with my installer?
Yes, as of April 1 2020, installing a heater appears to be considered an essential service in Victoria. This is of course open to change, and thus G-Store is unable to accept any responsibility or liability for this advice, but our installers are still working and available to give you a hand. Our expert team are still on the phones, and can help arrange a contactless changeover!
5. What’s new since last I installed a ducted gas heating system?
The big answer for that one is zoning*! You can now regulate where and when your heater sends the warm air, and where and when it doesn’t. For example, on cold nights, you can run the heater in your bedroom and keep it off in living areas. If you’re working from home, you can run it in your working space and keep it off in the bedroom until 5pm! *Available on select models.
6. How do heating capacity and airflow options work?
Kw/h relates to how much energy is produced per hour. Generally, 1 kW of heating is needed per square foot of space. As a rough guide we suggest:
Very cold zone: 1kW output per 8.5m²
Cold zone: 1kW output per 10m²
Cool Zone: 1kW output per 13 m²
Mild Zone: 1kW output per 16m²
Alternatively, you can try find the model number of an existing heater and try match it.
The airflow options are standard air or extra air. The extra air option enables for increased airflow.
All of our products are inspected by our experienced staff for quality and/or damage before sale or despatch.
If you have any issue with your purchase, please call G-Store on 1300 766 940 without delay. Make sure you have a copy of your invoice to hand. We will be happy to discuss the options that best solves the problem. Please do not return goods without our explicit instructions.
G-Store ships most of our products anywhere in Australia. You can also pick up free from our Melbourne store.
Shipping Cost Options
To offer you the most cost-effective shipping fees we use the Temando freight engine to dynamically search among available carriers and offer you
- The cheapest rate
- The fastest service
These are the two best options available at the time from among our carriers for your particular products to your specific location, wherever it is in the country.
We do not post to PO boxes.
Free Pick Up
If your delivery is to a Postcode within 150 km of G-Store in Melbourne (Malvern East) you will also be offered a Pick-Up In-Store option. If you select this, we will let you know as soon as your purchase is ready for Pick Up.
Malvern East – same day on stocked items if ordered before 2pm, next day after 2pm.
Warragul – next day on stocked items if ordered before 11am, otherwise add 1 business day.
Bonaire Pyrox Power Flued Inbuilt Natural Gas Wall Furnace- Includes Brackets
$1,580.00 – $1,780.00
If heating only the living area of your home is what you need, then the Pyrox Power Flued gas wall furnace is the solution. Designed to deliver floor level warmth, the Pyrox gas wall furnace is the ideal heater to accommodate living areas or large entertaining areas in any home. The Pyrox power flued wall furnace range that has an energy efficiency rating up to 4.3 stars*. The power flued range also uses a power flue system, which expels the combustion products outside leaving the air inside fresh and healthy.
Estimate Shipping
Why G-Store?
Australian Owned for 50 years
Free Expert Advice
Same Day Shipping on Selected Products
Money Back Guarantee
Australian Warehouse
Bonaire Pyrox Power Flued Inbuilt Natural Gas Wall Furnace- Includes Brackets
$1,580.00 – $1,780.00
Description
If heating only the living area of your home is what you need, then the Pyrox Power Flued gas wall furnace is the solution. Designed to deliver floor level warmth, the Pyrox gas wall furnace is the ideal heater to accommodate living areas or large entertaining areas in any home. The Pyrox power flued wall furnace range that has an energy efficiency rating up to 4.3 stars*. The power flued range also uses a power flue system, which expels the combustion products outside leaving the air inside fresh and healthy.
Why G-Store?
Australian Owned for 50 years
Free Expert Advice
Same Day Shipping*
Money Back Guarantee
Australian Warehouse
- Choice of two product sizes to heat small or large rooms
- Inbuilt models
- Power flued models
- Stylish slimline cabinet
- Electronic ignition to eliminate the need for wasteful pilot lights
- Simple to operate electronic controls
- Three pre-set temperature settings
- Rear Register option to split heating into two rooms
- Cool touch exterior cabinet
- Direct replacement for most gas wall furnace models
- Two year parts and labour warranty.**
- 10 years parts only warranty on heat exchanger and burner.**
- Power flued 9kW unit has an energy efficiency rating of 4.3 stars
Recommended Accessories
Heating FAQ’s
1. What is a heating changeover?
A heating changeover is the replacing of an old heating unit with a new one with similar physical properties.
2. Why change my model over instead of installing a new one?
Changing over a model is far less time consuming and thus significantly cheaper than installing a brand new model.
3. When is it time to get a new heater?
There are two common ways to know when the time has come to change your ducted gas heating. If you find that your utility bills are getting out of control, you may realise that your ducted gas heater is spending far more gas than it needs to – and a new, more efficient model is needed to cut your bills. The other reason is fairly simple – you’ve turned it on, and the air isn’t flowing!
4. My heater is malfunctioning but I’m worried about the coronavirus, is a changeover an “essential service” and how can I minimise contact with my installer?
Yes, as of April 1 2020, installing a heater appears to be considered an essential service in Victoria. This is of course open to change, and thus G-Store is unable to accept any responsibility or liability for this advice, but our installers are still working and available to give you a hand. Our expert team are still on the phones, and can help arrange a contactless changeover!
5. What’s new since last I installed a ducted gas heating system?
The big answer for that one is zoning*! You can now regulate where and when your heater sends the warm air, and where and when it doesn’t. For example, on cold nights, you can run the heater in your bedroom and keep it off in living areas. If you’re working from home, you can run it in your working space and keep it off in the bedroom until 5pm! *Available on select models.
6. How do heating capacity and airflow options work?
Kw/h relates to how much energy is produced per hour. Generally, 1 kW of heating is needed per square foot of space. As a rough guide we suggest:
Very cold zone: 1kW output per 8.5m²
Cold zone: 1kW output per 10m²
Cool Zone: 1kW output per 13 m²
Mild Zone: 1kW output per 16m²
Alternatively, you can try find the model number of an existing heater and try match it.
The airflow options are standard air or extra air. The extra air option enables for increased airflow.
All of our products are inspected by our experienced staff for quality and/or damage before sale or despatch.
If you have any issue with your purchase, please call G-Store on 1300 766 940 without delay. Make sure you have a copy of your invoice to hand. We will be happy to discuss the options that best solves the problem. Please do not return goods without our explicit instructions.
G-Store ships most of our products anywhere in Australia. You can also pick up free from our Melbourne store.
Shipping Cost Options
To offer you the most cost-effective shipping fees we use the Temando freight engine to dynamically search among available carriers and offer you
- The cheapest rate
- The fastest service
These are the two best options available at the time from among our carriers for your particular products to your specific location, wherever it is in the country.
We do not post to PO boxes.
Free Pick Up
If your delivery is to a Postcode within 150 km of G-Store in Melbourne (Malvern East) you will also be offered a Pick-Up In-Store option. If you select this, we will let you know as soon as your purchase is ready for Pick Up.
Malvern East – same day on stocked items if ordered before 2pm, next day after 2pm.
Warragul – next day on stocked items if ordered before 11am, otherwise add 1 business day.
RELATED PRODUCTS
Related products
-
SKU - ULT2IRinnai Ultima II Inbuilt Gas Flued Heater
-
SKU - 86033Braemar WF30 Ecostar 30MJ Wall Furnace
-
SKU - ULT2CRinnai Ultima II Console Gas Flued Heater
-
SKU - 1005FTRinnai Energysaver 1005FT Flued Gas Heater
