Reclaim Energy CO2 Heat Pump

 

Call for Price

 

Reclaim Heat Pump

The Reclaim Heat Pump, available from G Store, is an exceptional hot water system that provides an eco-friendly and cost-effective alternative to traditional electric water heaters. It is a cutting-edge heat pump that can help you save on electricity bills by using significantly less energy while delivering a higher thermal output. Unlike traditional electric water heaters that generate heat through electrical resistance, heat pumps use a different, more energy-efficient approach. They extract heat from the surrounding environment, such as the air or ground, and transfer it to the water, providing a much more efficient way to heat water.

The Reclaim Heat Pump is designed to leverage this efficiency to the fullest. By utilising the heat in the air, it consumes significantly less electricity than conventional electric water heaters, which directly convert electricity into heat. This results in substantial energy savings and, consequently, reduced electricity costs for your household.

With Reclaim Heat Pump, you’ll get to enjoy the following:

  • Low Energy Consumption
  • High Thermal Output
  • Environmental Benefits
  • Government Incentives

Reclaim Energy CO2 Heat Pump

With the Reclaim Energy CO2 Heat Pump hot water system, you’ll use less energy than an electric water heater for a higher thermal output. This is the quietest system on the market and has an average annual energy saving of up to 80% – making it also the most efficient heat pump system on the Australian market! Running costs are less than $1 a day, or virtually nothing if you have solar panels!

*Prices before basic Installation and STC Rebate. Melbourne Metro residents can receive up to an additional $2500 rebate on a fully supplied and installed system.

The Reclaim Energy CO2 Heat Pump hot water system offers not only exceptional energy efficiency but also a host of additional advantages that set it apart as the premier choice for hot water heating. It combines quiet operation, exceptional energy savings, superior efficiency, and minimal running costs, making it a sound financial investment for homeowners. The available rebates and incentives, particularly in Melbourne Metro, further sweeten the deal, ensuring you can confidently make the environmentally responsible and financially prudent choice.

Broken Hot Water system or a brand new installation? G-Store can organise a hassle-free changeover or installation service for your hot water in the Melbourne Metro area.
Call us on 1300 137 567 to organise a quote for installation.

Enquire About This Product Call 1300 137 567

More Information

The Reclaim Energy heat pump has been developed by 2 stand out players in the hot water industry:

  1. Apricus Australia – the original manufacturer of premium, high-efficiency evacuated tube solar hot water systems with a proven track record of delivering solar in Australian conditions.
  2. Chofu – the Japanese global manufacturing giant with over 20 years experience in producing class-leading heat pump technology.

The Heat Pump earns the greatest number of STC certificates (Federal) and VEEC certificates (Victorian) for any heat pump system on the market meaning savings of up to $2500-$3000 off the cost of this system for Victorian customers changing over from electric storage tanks.

The Reclaim Energy CO2 Heat Pump caters for all Australian conditions and environments, with the glass lined enamel tank suitable for all water types including high mineral and bore water. The premium stainless steel tanks are our preferred option for all other applications with its class-leading 15 year tank warranty and the option of a tall or squat tank for tight areas including indoor tank installations. No matter where you live there is a solution for you.

Tanks come in 250 or 315 litres so there is plenty of hot water even for the largest households.

Heat Pump Model EHPE-4550P-A

Heat output at
32.6°C ambient / 21.1°C cold water inlet
5.24 kW
Electric input at
32.6°C ambient / 21.1°C cold water inlet
0.87 kW
COP at 32.6°C
ambient / 21.1°C cold water inlet
6.02
Power input (MAX) 2.5 kW
Current input (MAX) 11 A
Circuit breaker
size
20 A
Standby power
consumption
0.0019 kW
Power supply 230-240V/50Hz
[single phase]
Heat pump
refrigerant
CO2 (R744)
Heat pump hot
water delivery
temperature
63 °C
Range of operating
ambient
temperature
10 to 43 °C
Heat pump unit
weight
48 kg
Heat pump location outdoor
Noise level 37 dB
Dimensions (H x W
x D)
675 x 825 x 300 mm
Rain resistance IPX4
Water port
connections (Inlet /
Outlet)
1/2” BSP, 12.7mm
Built-in freeze
and frost
control
Variable. Depends
on the
relative humidity,
water, & ambient temperature (i.e. about 2°C
water temperature & 5°C ambient temperature)

Smart Controller V1.1

Controller power
supply voltage and frequency
240V/50Hz (single
phase)
Signal from the
controller to heat pump
12V/50Hz
Controller location Mounted on wall or
tank
Heat pump on / off
temperature (based on the thermistor on the tank)
37/59 °C
Daily
Self-Legionella control
60°C at 45% level
on tank
IP Rating IP54
UV Rated Yes
Operational mode
(selectable by
the end user) 6 available options
Option 1: 24 hours – Continuous
Option 2: 9 hours (Off-Peak mode 1: 10pm – 7am)
Option 3: 6 hours (Off-Peak mode 2: 12am – 6am)
Option 4: 6 hours (10am – 4pm)
Option 5: Timer (Two-Zones)
Option 6: Remote (One Shot Boost)*
6 available options
* One Shot Boost is activated by a dry contact
signal from home management or PV inverters
or dry contact smart switches
NOTE
One Shot Boost: this activates the heat pump if
temperature is less than 59°C, heating up until
59°C is sensor level is achieved.

Smart WiFi Controller V2.0 (at additional cost)

Controller power
supply voltage and frequency
240V/50Hz (single
phase)
Signal from the
controller to heat pump
-7V to +12V
(common mode)
Controller location Mounted on wall or
tank
Heat pump on / off
temperature (based on the thermistor on the tank)
37/59 °C
Daily
Self-Legionella control
60°C at 45% level
on tank
IP Rating IP54
UV Rated Yes
Operational mode (selectable by
the end user)
Option 1: 24 hours – Continuous
Option 2: 9 hours (Off-Peak mode 1: 10pm – 7am)Option 3: 6 hours (Off-Peak mode 2: 12am – 6am)
Option 4: 6 hours (10am – 4pm)
Option 5: Timer (Two-Zones)
Option 6: Timer (Two-Zones) & Multiple Temperature Control
Option 7: Remote (One Shot Boost)*
Option 8: Holiday Mode (Trial) – one day/time set per week to meet
legionella control
Option 9: Wi-Fi control using Solar Maximiser tool (by Solar Analytics)
9 available options

*One Shot Boost is activated by a dry contact
signal from home management or PV inverters
or dry contact smart switches

NOTE
One Shot Boost: this activates the heat pump if
temperature is less than 59°C, heating up until
59°C is sensor level is achieved.

  • Does the Reclaim Energy CO2 Heat Pump Hot Water System require the assistance of an electric backup/booster element to heat water, when outside temperatures are very low?

No, the Reclaim Energy CO2 Heat Pump Hot Water System does not require an electric booster element

  • At what temperatures will the Reclaim Energy CO2 Heat Pump Hot Water System operate effectively?

The Reclaim Energy CO2 Heat Pump Hot Water System will operate effectively between -10ºC and 43ºC, without the need for an electric backup/booster element. It is also fitted with an inbuilt freeze protection, making it suitable for all Australian conditions and climate variations.

  • What is the noise level of the Reclaim Energy CO2 Heat Pump Hot Water System?

The CO2 Heat Pump is rated at 37dB, measured at 1m distance from the unit, which is whisper quiet, practically silent.

  • How does a CO2 Heat Pump Hot Water System work?

The Reclaim Energy CO2 Heat Pump Hot Water System operates like a refrigerator in reverse. It contains a fan that forces air through an evaporator that contains a refrigerant. The heat in the air passes through the evaporator and is absorbed by a natural refrigerant, CO2. The warm gaseous refrigerant is circulated in the system via a compressor. As it passes through the compressor, its pressure rises, as does its temperature. This hot refrigerant then passes through a heat exchanger to heat the water, which is finally pumped to the storage tank.

All of our products are inspected by our experienced staff for quality and/or damage before sale or despatch.

If you have any issue with your purchase, please call G-Store on 1300 137 567 without delay. Make sure you have a copy of your invoice to hand. We will be happy to discuss the options that best solves the problem. Please do not return goods without our explicit instructions.

G-Store ships most of our products anywhere in Australia. You can also pick up free from our Melbourne store.

Shipping Cost Options

To offer you the most cost-effective shipping fees we use the Temando freight engine to dynamically search among available carriers and offer you

  1. The cheapest rate
  2. The fastest service

These are the two best options available at the time from among our carriers for your particular products to your specific location, wherever it is in the country.

We do not post to PO boxes.

Free Pick Up
If your delivery is to a Postcode within 150 km of G-Store in Melbourne (Keysborough) you will also be offered a Pick-Up In-Store option. If you select this, we will let you know as soon as your purchase is ready for Pick Up.

Keysborough – same day on stocked items if ordered before 2pm, next day after 2pm.

Warragul – next day on stocked items if ordered before 11am, otherwise add 1 business day.

 

SKU: (REHP-CO2-250GL-V2) (REHP-CO2-315GL-V2) (REHP-CO2-250SSEW-V2) (REHP-CO2-315SSEW-V2) Categories: , Tag:

/*