Australian owned and operated for over 50 years
- Low maintenance easy to clean exterior cabinet
- Cool-to-touch
- Power flue with no in-room emissions
- Soft-air function for draught free heat
- Easy, simple to use controls and ignition system
- High efficiency heat exchanger maximises heat Output
- Thermostatic controlled three speed fan
- Overheat safety switches
- AGA Certification 8049 to AS 4553: 7458
- Warranties
- 2 Years Comprehensive
- 10 Years Heat Exchanger
- Inbuilt and console models
- Braemar SH / WF25 Horizontal Flue Kit
- Braemar SH / WF25 Wall Cavity Vertical Flue Kit
- Braemar SH / WF25 – Flue Offset Kit
- Braemar SH / WF25 – Flue Extension
- Braemar D11 / D12 / D45 / D55
- Vulcan series 20 / 22 / Quasar
- IXL 10862
- Convair Finesse Range
- Braemar D11 / D12 / D45 / D55
- Vulcan series 20 / 22 / Quasar
- IXL 10862
- Convair Finesse Range
| Unit Being Replaced | In-fill panel kit 085135 |
| Braemar D11/12 | – |
| Braemar D45/55 | Yes |
| Vulcan Series 20/22 | – |
| Vulcan Quasar | Yes |
| IXL 10862 | – |
| Convair Finesse | – |
1. What is a heating changeover?
A heating changeover is the replacing of an old heating unit with a new one with similar physical properties.
2. Why change my model over instead of installing a new one?
Changing over a model is far less time consuming and thus significantly cheaper than installing a brand new model.
3. When is it time to get a new heater?
There are two common ways to know when the time has come to change your ducted gas heating. If you find that your utility bills are getting out of control, you may realise that your ducted gas heater is spending far more gas than it needs to – and a new, more efficient model is needed to cut your bills. The other reason is fairly simple – you’ve turned it on, and the air isn’t flowing!
4. My heater is malfunctioning but I’m worried about the coronavirus, is a changeover an “essential service” and how can I minimise contact with my installer?
Yes, as of April 1 2020, installing a heater appears to be considered an essential service in Victoria. This is of course open to change, and thus G-Store is unable to accept any responsibility or liability for this advice, but our installers are still working and available to give you a hand. Our expert team are still on the phones, and can help arrange a contactless changeover!
5. What’s new since last I installed a ducted gas heating system?
The big answer for that one is zoning*! You can now regulate where and when your heater sends the warm air, and where and when it doesn’t. For example, on cold nights, you can run the heater in your bedroom and keep it off in living areas. If you’re working from home, you can run it in your working space and keep it off in the bedroom until 5pm! *Available on select models.
6. How do heating capacity and airflow options work?
Kw/h relates to how much energy is produced per hour. Generally, 1 kW of heating is needed per square foot of space. As a rough guide we suggest:
Very cold zone: 1kW output per 8.5m²
Cold zone: 1kW output per 10m²
Cool Zone: 1kW output per 13 m²
Mild Zone: 1kW output per 16m²
Alternatively, you can try find the model number of an existing heater and try match it.
The airflow options are standard air or extra air. The extra air option enables for increased airflow.
Contact G-Store at 1300 766 940
All of our products are inspected by our experienced staff for quality and/or damage before sale or despatch.
If you have any issue with your purchase, please call G-Store on 1300 766 940 without delay. Make sure you have a copy of your invoice to hand. We will be happy to discuss the options that best solves the problem. Please do not return goods without our explicit instructions.
G-Store ships most of our products anywhere in Australia. You can also pick up free from our Melbourne store.
Shipping Cost Options
To offer you the most cost-effective shipping fees we use the Temando freight engine to dynamically search among available carriers and offer you
- The cheapest rate
- The fastest service
These are the two best options available at the time from among our carriers for your particular products to your specific location, wherever it is in the country.
We do not post to PO boxes.
Free Pick Up
If your delivery is to a Postcode within 150 km of G-Store in Melbourne (Malvern East) you will also be offered a Pick-Up In-Store option. If you select this, we will let you know as soon as your purchase is ready for Pick Up.
Malvern East – same day on stocked items if ordered before 2pm, next day after 2pm.
Warragul – next day on stocked items if ordered before 11am, otherwise add 1 business day.
Braemar WF25 Eco-Superstar Wall Furnace
$2,239.00
An ultra-efficient furnace with an impressive 4.8 star rating the WF25 heats up to 85 square metres and is a perfect solution for those wanting super-efficient and economical heating.
Estimate Shipping
Why G-Store?
Australian Owned for 50 years
Free Expert Advice
Same Day Shipping on Selected Products
Money Back Guarantee
Australian Warehouse
Braemar WF25 Eco-Superstar Wall Furnace
$2,239.00
Description
An ultra-efficient furnace with an impressive 4.8 star rating the WF25 heats up to 85 square metres and is a perfect solution for those wanting super-efficient and economical heating.
Why G-Store?
Australian Owned for 50 years
Free Expert Advice
Same Day Shipping*
Money Back Guarantee
Australian Warehouse
- Low maintenance easy to clean exterior cabinet
- Cool-to-touch
- Power flue with no in-room emissions
- Soft-air function for draught free heat
- Easy, simple to use controls and ignition system
- High efficiency heat exchanger maximises heat Output
- Thermostatic controlled three speed fan
- Overheat safety switches
- AGA Certification 8049 to AS 4553: 7458
- Warranties
- 2 Years Comprehensive
- 10 Years Heat Exchanger
- Inbuilt and console models
- Braemar SH / WF25 Horizontal Flue Kit
- Braemar SH / WF25 Wall Cavity Vertical Flue Kit
- Braemar SH / WF25 – Flue Offset Kit
- Braemar SH / WF25 – Flue Extension
- Braemar D11 / D12 / D45 / D55
- Vulcan series 20 / 22 / Quasar
- IXL 10862
- Convair Finesse Range
- Braemar D11 / D12 / D45 / D55
- Vulcan series 20 / 22 / Quasar
- IXL 10862
- Convair Finesse Range
| Unit Being Replaced | In-fill panel kit 085135 |
| Braemar D11/12 | – |
| Braemar D45/55 | Yes |
| Vulcan Series 20/22 | – |
| Vulcan Quasar | Yes |
| IXL 10862 | – |
| Convair Finesse | – |
1. What is a heating changeover?
A heating changeover is the replacing of an old heating unit with a new one with similar physical properties.
2. Why change my model over instead of installing a new one?
Changing over a model is far less time consuming and thus significantly cheaper than installing a brand new model.
3. When is it time to get a new heater?
There are two common ways to know when the time has come to change your ducted gas heating. If you find that your utility bills are getting out of control, you may realise that your ducted gas heater is spending far more gas than it needs to – and a new, more efficient model is needed to cut your bills. The other reason is fairly simple – you’ve turned it on, and the air isn’t flowing!
4. My heater is malfunctioning but I’m worried about the coronavirus, is a changeover an “essential service” and how can I minimise contact with my installer?
Yes, as of April 1 2020, installing a heater appears to be considered an essential service in Victoria. This is of course open to change, and thus G-Store is unable to accept any responsibility or liability for this advice, but our installers are still working and available to give you a hand. Our expert team are still on the phones, and can help arrange a contactless changeover!
5. What’s new since last I installed a ducted gas heating system?
The big answer for that one is zoning*! You can now regulate where and when your heater sends the warm air, and where and when it doesn’t. For example, on cold nights, you can run the heater in your bedroom and keep it off in living areas. If you’re working from home, you can run it in your working space and keep it off in the bedroom until 5pm! *Available on select models.
6. How do heating capacity and airflow options work?
Kw/h relates to how much energy is produced per hour. Generally, 1 kW of heating is needed per square foot of space. As a rough guide we suggest:
Very cold zone: 1kW output per 8.5m²
Cold zone: 1kW output per 10m²
Cool Zone: 1kW output per 13 m²
Mild Zone: 1kW output per 16m²
Alternatively, you can try find the model number of an existing heater and try match it.
The airflow options are standard air or extra air. The extra air option enables for increased airflow.
Contact G-Store at 1300 766 940
All of our products are inspected by our experienced staff for quality and/or damage before sale or despatch.
If you have any issue with your purchase, please call G-Store on 1300 766 940 without delay. Make sure you have a copy of your invoice to hand. We will be happy to discuss the options that best solves the problem. Please do not return goods without our explicit instructions.
G-Store ships most of our products anywhere in Australia. You can also pick up free from our Melbourne store.
Shipping Cost Options
To offer you the most cost-effective shipping fees we use the Temando freight engine to dynamically search among available carriers and offer you
- The cheapest rate
- The fastest service
These are the two best options available at the time from among our carriers for your particular products to your specific location, wherever it is in the country.
We do not post to PO boxes.
Free Pick Up
If your delivery is to a Postcode within 150 km of G-Store in Melbourne (Malvern East) you will also be offered a Pick-Up In-Store option. If you select this, we will let you know as soon as your purchase is ready for Pick Up.
Malvern East – same day on stocked items if ordered before 2pm, next day after 2pm.
Warragul – next day on stocked items if ordered before 11am, otherwise add 1 business day.
Related products
-
Out of stock
SKU - 2620972 -
Out of stock
SKU - 86033 -
Out of stock
SKU - Braemar WF40
